Parking in the Liftparker N4102 system combined with N6101 and N6301 systems

Supply and installation of Liftparker N4102 parking units together with N6101 and N6301 sliding pallets in the underground garage of a residential building.

The Liftparker N4102 is a solution that can be used with a very low clearance (from as little as 290 cm). A clear advantage is the simplicity of the technical solution. When lowered, the unit remains accessible in a horizontal position; when raised, it is inclined. In the Liftparker N4102 system, the angle of the lower platform remains constant (8°). The unit is available in two versions: single (S-system for 2 vehicles) and double (D-system for 4 vehicles).

The longitudinal sliding pallet system is available in two variants: single [N6101] and double (tandem) [N6201]. The pallets are placed in front of a row of traditional parking spaces, increasing the parking area by 30%. Their advantage is that they do not require widening of the access road. The transversely sliding pallet systems [N6101] and [N6201] also utilise parking space in areas behind columns and in corners.

The transversely sliding platform system N6301 is designed for independent parking in rows (one behind the other) inside buildings. A row of platforms is placed in front of a row of traditional parking spaces, making it possible to double (or triple in the case of two rows of platforms) the number of parking spaces served by a single access road. The sliding platforms are not drive-through, so the only requirement is to provide free space (the width of a traditional parking space) for the sliding movement. The N6301 system also utilises parking space in areas behind columns and in corners, where traditional technology does not allow parking spaces to be created.