Independent parking

Borderparker is one of the most modern automatic parking systems. It is a system of longitudinally arranged pallets, one behind the other, coupled with a serving lift usually located in a central position. The system can be assembled with one, two or three pallets on one or both sides of the lift shaft on multiple levels. It can be located underground. The entrance room can be drive-through or equipped with a turntable. The advantage of the system is its modularity and the ability to utilise extremely narrow spaces under or between buildings.

The DE-48 unit is a solution for independent parking of vehicles. Thanks to the columns placed against the rear wall, access for drivers to the vehicle area has been facilitated. As with the standard DE-38, it features horizontally positioned platforms both in the lowered and raised position. Its clear advantage is the simplicity of the technical solution and the use of flat approach plates. The unit is available exclusively in the single version.

The DE-58 unit is the best solution for independent parking of vehicles with a pit outside the building. This system allows two vehicles to be parked vertically. It is a drive-through system – it allows driving over the upper platform to the parking spaces located behind it. As with other DE- platforms, flat approach plates have been used here. The unit is available in the single version (S-system for 2 vehicles) and in the double version (D-system for 4 vehicles).

The DE-59 unit is the best solution for independent parking of vehicles with a pit outside the building. This system allows three vehicles to be parked vertically. It is a drive-through system – it allows driving over the upper platform to the parking spaces located behind it. As with other DE- platforms, flat approach plates have been used here. The unit is available exclusively in the single version (S-system for 3 vehicles).

The DE-61 unit is a solution for independent parking of vehicles without a pit. It is a semi-automatic system consisting of a combination of transversely sliding pallets and lifting platforms. It can be configured with a minimum of 2 – maximum of 10 segments. The unit can be prepared as a drive-through system and combined with another row of such units (system DE-611) or with transversely sliding pallets. As with other DE- platforms, flat approach plates have been used here.

The DE-611 system is a combination of two DE-61 systems. It is an independent parking system without a pit on 2 levels with semi-automatic control. This system is a combination of lifting platforms and transversely sliding platforms. It can be configured with a minimum of 2 – maximum of 10 segments. Thanks to the system columns located only at the rear, free access to the vehicle doors is provided. Flat approach plates ensure higher comfort and driving safety. The system can be operated using a remote control, with which the desired platform is selected.

The DE-613 system is a combination of the DE-61 and DE-63 systems. It is an independent parking system with a pit on 2 and 3 levels with semi-automatic control. This system is a combination of lifting platforms and transversely sliding platforms. It can be configured with a minimum of 2 segments in 2 rows. Thanks to the system columns located only at the rear, free access to the vehicle doors is provided. Flat approach plates ensure higher comfort and driving safety. The system can be operated using a remote control, with which the desired platform is selected.

The DE-62 unit is a semi-automatic system for independent parking of vehicles with a pit. It is a system consisting of a combination of transversely sliding pallets and lifting platforms. It can be configured with a minimum of 2 – maximum of 10 segments. The unit can be combined with transversely sliding pallets. As with other DE- platforms, flat approach plates have been used here.

The DE-622 system is a combination of two DE-62 systems. It is used for semi-automatic, independent parking of vehicles with a pit. This system consists of a combination of transversely sliding pallets and lifting platforms. It can be configured with a minimum of 2×2 segments. To reach the rear parking spaces, it is enough to pass through the front row. As with other DE- platforms, flat approach plates have been used here.

The DE-63 unit is a semi-automatic 3-level system for independent parking of vehicles with a pit.. It is a system consisting of a combination of transversely sliding pallets and lifting platforms. It can be configured with a minimum of 2 – maximum of 10 segments. The unit can be combined with drive-through platforms DE-61 (system DE-613) or with transversely sliding pallets. As with other DE- platforms, flat approach plates have been used here.

The DE-633 system is a combination of two DE-63 systems. It is used for semi-automatic, independent parking of vehicles on 3 levels with a pit. This system consists of a combination of transversely sliding pallets and lifting platforms. It can be configured with a minimum of 2×2 segments. To reach the rear parking spaces, it is enough to pass through the front row. As with other DE- platforms, flat approach plates have been used here.

The DE-64 unit is a solution for independent parking of vehicles on 3 levels with semi-automatic control. It is an ideal solution for garages with a low ceiling where a deeper pit can be made. This system is a combination of lifting and sliding platforms. It features flat and horizontally positioned platforms that offer higher comfort and safety for the driver and the car. The modular layout requires a minimum of 2 segments.

The DE-65 system is a solution for independent parking of vehicles on 3 levels with semi-automatic control. It is ideal for outdoor installation or in halls with a high ceiling. It is also excellent for vehicle presentation and temporary storage. The units can be covered with a glazed façade. The DE-65 system is a combination of lifting and sliding platforms. It features flat platforms that offer higher comfort and safety for the driver and the car. The system can be operated using a remote control, with which the desired platform is selected.

The DE-700 system is used for fully automatic parking of vehicles. It is an ideal solution for locations with limited space – it can be adapted to the needs of the project. Thanks to this system, up to 80% of the parking area and construction costs can be saved. The vehicle can be easily placed in the transfer zone, from where it will be safely transferred to the parking space. Innovative conveyors for transporting vehicles with pallets in the X and/or Y direction are located on the parking levels and in the lift.

The DE-800 system is used for fully automatic parking of vehicles. It is an ideal solution for locations with limited space – it can be adapted to the needs of the project. Thanks to this system, up to 80% of the parking area and construction costs can be saved. The vehicle can be easily placed in the transfer zone, from where it will be safely transferred to the parking space. Fully automatic parking (XY) takes place on pallets that move longitudinally and horizontally. The installation allows the creation of 1 to 4 levels for a maximum of 50 vehicles in rows.

The DE-900 system is used for fully automatic parking of vehicles. It is an ideal solution for locations with limited space – it can be adapted to the needs of the project. Thanks to this system, up to 80% of the parking area and construction costs can be saved. The vehicle can be easily placed in the transfer zone, from where it will be safely transferred to the parking space. Two lifts and horizontal conveyor systems simultaneously move the cars from the transfer cabins to the parking levels. Flexible layout options are available to adapt them to the needs of your project.

The NK36 unit with inclined platforms (upper and lower) is a solution for independent parking that can be used even with a very low clearance in the garage (from as little as 295 cm). Its clear advantage is the simplicity of the technical solution and the use of flat approach plates. The unit is available in the single version (S-system for 2 vehicles) and the double version (D-system for 4 vehicles).

The NK37 unit is a solution for independent parking that can be used even with a very low clearance in the garage (from as little as 295 cm!). Its clear advantage is the simplicity of the technical solution and the use of flat approach plates. When lowered, the unit remains accessible in a horizontal position, while when raised it is inclined. The unit is available in the single version (S-system for 2 vehicles) and the double version (D-system for 4 vehicles).

The Automatic ROOT Parker is an advanced system utilising Transverse and Border type construction technologies, in which two types of platforms are used: transversely and longitudinally sliding platforms that can only move in their designated directions. The common core of the system is a lift, which in the entrance room area can be equipped with a turntable. This turntable can also be located on one of the underground levels next to the lift shaft. The advantage of the system is the possibility of locating the parking facility in very complex situations.

Transversely sliding pallets NK6501 are used for independent parking of vehicles in rows (one behind the other). They are intended for indoor use. A row of platforms is placed in front of a row of traditional parking spaces, which makes it possible to almost double (or triple in the case of two rows of platforms) the number of parking spaces served by a single access road. Transverse pallets are not drive-through. They are produced exclusively in the single version (S-system for 1 vehicle).

The Automatic TRANSVERSE Parker is a system of transversely arranged pallets, one behind the other, coupled with a serving lift usually located in a central position. The system can be assembled with one, two or three pallets on one or both sides of the lift shaft on multiple levels. It is located underground. The entrance room can be drive-through or equipped with a turntable. The advantage of the system is its modularity and the ability to utilise narrow spaces under or between buildings. Recommended for small and medium-sized parking facilities.

The NK38 unit is our standard solution for independent parking of vehicles, characterised by horizontally positioned platforms both in the lowered and raised position. Its clear advantage is the simplicity of the technical solution and the use of flat approach plates. The unit is available in the single version (S-system for 2 vehicles) and the double version (D-system for 4 vehicles).